TR-S2510 POE

Product Overview
TR S2510POE series of switches has 8 10/100/1000 BASE-TX auto-adaptable ports and 2 gigabit SFP ports, among which 8 1000M TX ports support 802.3af and 802.3at.
Along with the continuous development of the WiFi technology, 802.11b/g will gradually be upgraded to 802.11N and the results it brings are firstly that the wireless access bandwidth of the network increases from 54Mbps to 300Mbps or even to 600Mbps and secondly that the power consumption of wireless AP increases from several watts to over ten watts or to over twenty watts. In this case, the 100M POE switches can no more meet the requirements, while Techroutes gigabit POE switches start to show their advantages in the 802.11N construction.
At the same time,Techroutes gigabit switches can support the 802.3at power supply with
up to 30W, an ideal solution for the requirements of the new generation of wireless APs.

Carrier-class Ethernet Access Switches
TR S2510POE supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP/MSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers.
TRS2510POE has powerful ACL functions to access and control L2-L7 data based on physical port, VLAN, MAC, IP and protocol port ID, and providing carriers flexible and various policy control methods.
TRS2510POE supports ISSU (In-Service Software Upgrade), which guarantees the user data non-stop forwarding when the system is upgrading.
TRS2510POE supports various L2 multicast function, including user fast-leave mechanism and cross VLAN multicast replication function.

Complete POE Power Supply Function
TRS2510 POE supports 802.3AF/AT standard, built-in high-power power supply
TRS2510POE supports POE non-stop powering when it is in hot-restart.
TRS2510 supports power port priority when the power is not efficient.
TR S2510POE supports the POE port with 2KV thunder prevention.

Rich QoS Policies
S2510POE supports complex traffic classification based on VLAN IDs, source MAC/IP addresses, destination MAC/IP addresses, IP protocols, or priorities. It also supports priority remark. These functions provide an effective way for users to optimize their businesses
Provides flexible bandwidth control policies, supporting port-/flow-based flow limit, and
ensuring the line speed forwarding of each port to make sure the high quality of video, audio and data services
S2510POE also supports multiple queue grooming algorithms such as SP, WRR or SP+WRR.

Comprehensive IPv6 Solutions
S2510POE supports the IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, etc.
S2510POE supports IPv6 based Ping, Traceroute, Telnet, SSH, ACL, meeting the need
of IPv6 network equipment management and service control.

Comprehensive Security Mechanisms
S2510POE adopts advanced hardware architecture design, realizing the hierarchical
scheduling and protection of the packet. It provides multiple security measures to defend against attacks from SYN Flood, UDP Flood, broadcast storm and mass flow of DOS or TCP. It also supports command line authority control based on user levels. Comprehensive Security Certification:
S2510POE complies with IEEE 802.1x, Radius, Tacacs+.
S2510POE supports the suppression of broadcast, multicast and unknown unicast
packet, ensuring the equipment can operate normally in harsh network conditions.
S2510POE has the perfect loop detection mechanism.
S2510POE supports the port isolation in a same VLAN, DHCP-Snooping and IP+MAC+ port binding.

Convenient Management and Maintenance
S2510POE supports multiple management styles such as Console, Telnet and SSH.
S2510POE supports WEB based management.The management is more simple and effective.
S2510POE supports upload and download of TFTP files.
S2510POE supports ISSU (In-Service Software Upgrade).
S2510POE supports SNMP. By cooperating with Techroutes NetView EMS, functions
including the equipment auto-discovery, the topology management, the equipment
configuration management, the performance data analysis, and the fault management can be realized. In this way, the network management is simplified and the user gets a new product experience.

 

Features and Functions Supported

TR-S2500 POE Series

Item

TR S2510POE

Switching capacity

36Gbps

Forwarding rate

15Mpps

Switch itself power consumption

<30W

POE/POE+

Support

POE power

150W

can realize 802.3af (15.4W) full load

TR-S2510 POE features

Power supply Environment

AC: 100V-240V, 50Hz±10%

Operating temperature/humidity: 0℃-50℃, 10%-90% non-condensation

Storage temperature/ humidity: -20℃-70℃; 5%-95% non-condensation

MAC switching function

Static configuration and dynamically learning of MAC address

Check and delete MAC address

Configuring of MAC address aging time

Limit on MAC address learning number

MAC address filtering function

VLAN

4K VLAN entries

GVRP

1:1 and N:1 VLAN Mapping

QinQ

STP

802.1D (STP), 802.1W (RSTP), 802.1S (MSTP)

BPDU protection, root protection and ring protection

Multicast

IGMP v1/v2

IGMP Snooping

IGMP Fast Leave

Multicast group policy and multicast number limit

Multicast traffic cross VLAN duplication

IPv6

ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet

IPv6 Neighbor Discovery

MLD v1, MLD Snooping

QoS

Traffic classification of each field of L2/L3/L4 protocol headers

CAR traffic control

802.1P/DSCP priority remark

Multiple queuing algorithms such as SP, WRR or SP+WRR

Tail-Drop, sRED

Traffic supervision and traffic shaping

Security features

Identification and filtering of L2/L3/L4 based ACL

Defend against DOS or TCP attacks

Suppression of broadcast, multicast and unknown unicast packet

Port isolation

Port security, IP+MAC+port binding

DHCP Snooping,

IEEE 802.1x certification

Radius and Tacacs+

Command line authority control based on user levels

Reliability

Static/LACP link aggregation

EAPS

ERPS (Single Ring)

ISSU

Dying Gasp

Management and Maintenance

Console, Telnet, SSH 2.0

WEB based management

SNMP v1/v2/v3

Upload and download of TFTP files

RMON

ZTP

 

Order Information

Model

Description

TR-S2510POE -AC

Ethernet POE switch with 8 gigabit TX ports, 2 gigabit SFP ports (1 console port, 8 gigabit POE ports, 2 gigabit SFP ports; standard AC220V power supply, 170W Power supply, 1U, standard 19-inch rack -mounted installation

TR-S2510POE -DC

Ethernet POE switch with 8 gigabit TX ports, 2 gigabit SFP ports (1 console port, 8 gigabit POE ports, 2 gigabit SFP ports; standard 48VDC power supply, 1U, standard 19-inch rack-mounted installation

 

Sitemap | Terms of Use | Privacy Policy