TECHROUTES S2510 switches, which are gigabit switches and framed on the new-generation Broadcom chip, are developed by TECHROUTES for working in high-performance network groups and enterprise’s networks. They have 8 10/100/1000 Base-TX auto-adaptable RJ-45 ports and 2 optional SFP gigabit ports, and support 10/100/1000M connections, so networks can be flexibly configured.
TECHROUTES S2500 switch series can access all Ethernet or fast-Ethernet devices, so this series is a very compatible one. S2500 switch series can not only provide workgroups or enterprises those connections with high bandwidth, high performance and multi-media, but meanwhile enhance the capacity of the server group so that users can save the whole network resources rapidly. The application of it can settle the transmission bottleneck resulting from insufficient network bandwidth and rapidly increasing users, but the cost to apply it is low and the management is relatively simple.

Technical Indexes


Standard configuration

8 10/100/1000M Base-T Ethernet ports

2 gigabit SFP optical ports

One Console port

Backplane bandwidth


Forwarding rate

Full wire-speed filtering and forwarding

Switching mode

Store forwarding

Address table


Queue buffer


Flow control

Backpressure is adopted for half-duplex, while IEEE802.3x is adopted for full-duplex.

Broadcast control

The broadcast storm is constrained. When the threshold value for controlling the broadcast storm is reached, the broadcast packets are stopped from being forwarded.

Multicast control

Automatically monitoring IGMP packets


Two transmission queues on each port are mapped to eight priority values of 802.1p.

Interface binding

Eight interfaces can be bound in a group through dynamic LACP or static aggregation, and 12 groups can be supported simultaneously.


IEEE 802.1D-1998 spanning tree, path backup, IEEE 802.1w(RSTP), IEEE802.1s (MSTP)


Supporting port-based VLAN, 802.1Q-labelled VLAN and dynamic VLAN configuration through GVRP

VLAN quantity





Supporting QoS

Supporting ACL, flow classification on L2 to L4, and flow class division

Network management

Supporting CLI, Telnet, SNMP and RMON

Supporting multiple general network management software

Network security

IEEE 802.1x, port-based access control, RADIUS, TACACS

Supporting dhcp snooping on the hardware

Supporting DAI and static/dynamic ARP prevention on the hardware

Supporting IP ACL, MAC ACL and Vlan ACL on hardware



Power source

110-240VAC (auto-adaptable), 47-63Hz, 1A/230V


Power indicator, system indicator, connection/data forwarding indicator, 10/100M indicator

Temperature and humidity

Working temperature: 0-50℃

 Storage temperature: -40-70℃

Humidity: 0-90% no condensation


Sitemap | Terms of Use | Privacy Policy