POE Media Converter1

10/100M P0E(PSE) Media Converter

-10/100Base-TX UTP to l00Base-FX fiber media convertion

-IEEE802.3af PoE PSE compatible

-Built-in AC/DC power supply

-Over-current protection

-choice of SC, BiDi or LC connectors for multi mode and single mode

-DIP switch to set different configurations

-LFP (Link Fault Pass-through) support

POE-FR200 is a 10/l00Base-TX to l00Base-FX media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5 UTP cable (cable length up to 100 meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.

Technical Specifications:

Data Rates:

- 10/100 Mbps (802.3 l0Base-T/802.3u l00Base-T)

- 100Mbps (l00Base-FX)

Input Power Requirements:

- Input voltage- 100 VAC to 240 VAC

- Input frequency- 47 Hz to 63 Hz

Power over Ethernet Output:

- Pin Assignment and Polarity- 4/5 (V+),7/8 (V-)

- Output Power- please refer to ordering information

- Efficiency- 75% min

- Short circuit protection -auto recovery

- Over current protection- auto recovery

Environmental Conditions:

- Operating temperature- 0°C to 50°C

- Cooling -free air convection

- Storage temperature- -20°C to +85°C

- Operating Humidity- 90% max, non-condensing

Mechanical Specifications:

- Case Material- Iron

- Case Color- Black

- Net Weight- 540g approx. / unit

- Dimensions -.110(W) x 40(H) x 140(L) (mm)

Do not include transceiver length

Connectors:

- AC Inlet- IEC-J-4

- LAN -Shielded R.J-45

- Fiber -see ordering information

Ordering Information:

Part Number

Supported

Standard

Output

Voltage

Output

Current

Output

Power

Remark

1

IEEE802.3af

48V

0.54Amax

25W max

Default

2

IEEE802.3af

56V

0.54Amax

30W max

Optional

3

Non-standard

48V

0.60A max

30W max

optional

4

Non-standard

24V

1.20A max

30W max

optional

·         fiber type and distance. For more details, please refer

Suffix

Description

Suffix

Description

SC-M02

SC, Multi-Mode, 2km / l300nm

LC-M02

LC SFP, Multi-Mode, 2km /l300nm

SC-SO5

SC, Single-Mode, 5km,13l0nm

LC-SO5

LC SFP, Single-Mode, 5km, l3l0nm

SC-S20

SC, Single-Mode, 20km,13l0nm

LC-S20

LC SFP, Single-Mode, 20km,l3l0nm

SC-S40

SC, Single-Mode, 40km,13l0nm

LC-S40

LC SFP, Single-Mode, 40km,l3l0nm

SC-S60

SC, Single-Mode, 60km,13l0nm

BS3-S20

BiDi SC, Single-Mode, 20km,

1310/l550nm

SC-S80

SC, Single-Mode, 80km,13l0nm

BS3-S40

BiDi SC, Single-Mode, 40km,

1310/l550nm

SC-SA0

SC, Single-Mode, 100km,1550nm

BS5-S20

BiDi SC, Single-Mode, 20km,

1550/l3l0nm

SC-SC0

SC, Single-Mode, 120km,1550nm

BS5-S40

BiDi SC, Single-Mode,40km,

1550/l3l0nm

 

Sitemap | Terms of Use | Privacy Policy