TD- CNV-ETH E1

Overview

TD CNV-ETH-E 1 converter is a high performance, remote, self-learning Ethernet Bridge. Its compact size and low cost make it ideal for cost-sensitive bridging applications or as a LAN extender over bit stream type infrastructures. Its El data interface also provides an economical digital access solution for El and Fractional El network Services, which can work at data rates of 64Kbps to 2048Kbps. User data is

placed into the El frame, using only the required number of timeslots. Timeslot assignment is accomplished according to the Data Port speed and manual setting of DIP switches. The main El link may be clocked from the recovered receive clock or from an internal oscillator. For easy to check the fault of network line, the device provides loop selection, both local loop and remote loop. Furthermore, it can be managed by the

software Fi-View-PC.

• Key features

• High performance bridge for l0Base-T Ethernet extension

• Fully compatible with IEEE 802.3 and Ethernet Standards

• El channel: Full and Fabrication optional, 75/120 ohm optional

• Ethernet Port:: 10/100Mbps, Full/Half Duplex Mode compatible

• l0/l00Base-T LAN Interface on RJ-45 connector and MDI/MDI-X optional

• Allow transmitting and receiving VLAN data packet

• 30000frames per second filtering and forwarding rate

• 8000MAC address LAN table, and automatic LAN table learning and aging.

• Standalone and 16 slots chassis optional

• Power of Chassis: 2 Slots for slide in power supply module, AC or DC power supply

module, Redundant Power supported.

Specifications

El interface

Data rate: Nx64Kbps N=1-32

Code type: HDB3

Compliant with G.703, G.704, G.823

75Ω/120Ω Optional

BNC(75Ω) / RJ45(120Ω)

Framed / Unframed optional

Ethernet Interface

Standard: IEEE802.3, 802.3u

10/100Mbps, Half/Full Duplex

RJ45 Connector, MDI/MDI-X switch

Number of Ports: 1

LED

RXD TXD LINK FDX LOS LOF COL LOOP POWER

Size

Standalone: 252 (w) X136 (D) X40 (H) mm

Chassis: 19’ (w) >< 340mm (D) X 4U (H) mm

Power

INPUT:

AC Power: 100V-240V, 0.4-0.2A, 50-60 Hz

DC Power: -48V, 0.4A

Power :<2W for each standalone or module

Environment

Operation

Temperature: 0°C”—50°C;

Humidity: 0%’—90% (non-condensed)

Air pressure: 86kPa’’— 106 kPa

Transport and store

Temperature: -20°C ‘—60°C;


Order Information

P/N:

F4-51A 10/100Base-T to E1 Converter, Standalone Device, 220VAC Power input

F4-51D 10/100Base-T to E1 Converter, Standalone Device, -48VDC Power input

F4-51M 10/100Base-Tto E1 Converter, Module Card

FC-416 16 Slots Chassis,

 


Sitemap | Terms of Use | Privacy Policy