TD-E1-8-FXO-FXS-MUX

Functions

TD-E1-8*FXO-FXS-MUX offer 8 POTS (FXO/FXS) over E1 transmission also can with 1-4 Ethernet and 1RS232 together

Product Characteristics

• realizes long-distance monitoring of local device to the remote device based on   self-copyright IC;

• provides 1-4 channels Ethernet connectors, 10M/100M, full /half duplex self adapt, support VLAN.  supports AUTQ-MDIX (cross over and straight through self adapt)

• 4 Ethernet interlaces support channel separate function, can set VLAN based on TAG

• provides two clocktpes E1 master clock, E1 line clock;

• provides 3 kinds of loop-return function, namely E1 self-looping at local end, Ethernet self-looping at local end, ordered to self-loop at remote end;

• realize the automatically rate set of local device to remote device

• El supports 750 unbalanced and 1200 balanced impedance at the same time;

• Provide Ethernet auto reset function, run more stably.

• Various Ethernet data indicate functions, which indicate data transmission status timely;

• Provides 1-8 voice channels, support calling indication

• Voice port supports O port and S port, O port connects switch and S port connects user’s phone; also  support 2&4 wire E&M for your option

• PS232 channel can transfer asynchronous serial data with self-adaptable baud rate of 300 to 115.200;

E1 Interface

Interface standard: Conforms to G.703 standard

Interface rate: Nx64Kbps, N: 1-32

Vibration characteristics: Satisfies G.742 and G.823 standard

Transmission capacity: 1*E1

Clock type: internal-clock, route clock

Connecter: BNC (75 ohm), R.J45 (120 ohm)

Interface impedance: 75 (non- balanced), 120 (balanced)

10/100 Base-T Interface

Rate: 10/100M, full/duplex auto-negotiation

Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)

MAC address Entries: 4096 Entries

Total Memory Sizes: 64MBits SCRAM

Physical interface: R.J45, support AUTO-MDIX

FXS:

Alarm voltage: 75V

Alarm frequency: 25HZ

2 line input impedance: 6000 (hanging off)

Wastage: 40db

FXO:

Alarm detecting voltage: 35V

Alarm detecting frequency: 17HZ-60HZ

2 line input impedance: 6000 (hanging off)

Wastage: 40db

RS232 port

Rate: 300-115.2Kbps auto-adaptable (Asynchronous)

Interlace characteristic: satisfies ITU-T V.24

Power supply

Working voltage range wide, good anti-disturb and Isolation, work stable 

 Option I -DC-48V, range DC-36V--DC-72C option II —AC220V,

Range ACl65V-AC240V

Power Consumption: <=3 Watts

Dimension (19 inch rack mount)

Length: 433mm

Width: 138mm

Height: 44mm

Order information

TD-E1-8*FXO-FXS-MUX-AC

TD-E1-8*FXO-FXS-MUX-DC

TD-E1-8*FXO-FXS-ETH-MUX-AC

TD-E1-8*FXO-FXS-ETH-MUX-DC

TD-E1-8*FXO-FXS-ETH-RS232-MUX-AC

TD-E1-8*FXO-FXS-ETH-RS232-MUX-DC

 

 

 

 

 

 

 

 

 

 

 

Sitemap | Terms of Use | Privacy Policy