TD-E1-16-FXO-FXS-MUX

Functions

TD-E1-16*FX0-FXS-MUX 16 Voice POTS (FXO/FXS) over E1/G.703 multiplexer provides conversion between ITU-T G.703 standard E1 framed interface and 4 fast ethernet+1~16 voice POTS FXO/FXS interface, can through E1 channel provide 1-16 voice, realize the long-distance extend of telephone line through E1 channel. It also provides one RS232 data channel.The16 voice POTS FXO/FXS over E1 multiplexer can automatically connected to the LAN with its uninterrupted learning the MAC address and the address as another purpose of the frame relay LAN. The 16voice and Ethernet to E1 interface converters widely used for LAN and Wan networking, control, and so on, and particularly applicable to the network users to the network users with a single E1 channel access data and voice at the same time.

Features       

          Realizes long-distance monitoring of local device to the remote device based on self-copyright IC;

          Provides two clock types: E1 master clock, E1 line clock;

          Support SNMP for option

          Realize the automatically rate set of local device to remote device

          has the function of pseudo-random code testing, convenient for opening of the circuit, and can be used as an error code instrument;

          E1 supports 75Ω unbalanced and 120Ω balanced impedance at the same time;

          Provides 16 voice channels, support calling indication

          Voice port supports O port and S port, O port connects switch and S port connects user’s phone;


       E1 interface 

Interface standard: Conforms to G.703 standard

Interface rate: 2048kbps

Code: HDB3

Interface impedance: 75Ω (unbalanced), 120Ω (balanced)

Connecter: BNC (75 Ω), RJ45 (120 Ω)

Vibration characteristic: Satisfies G.742 and G.823 standard

Clock type: internal-clock, line clock

 

10/100 Base-T Interface

Rate: 10M/100M full/half duplex self adapt

 Protocol: support IEEE 802.3£¬IEEE    802.1Q(VLAN)
 MAC address table: 4096 MAC addresses
 Ethernet Total Memory Sizes: 64MBits   SDRAM
 Physical interface: RJ45, support AUTO-MDIX(cross over and straight through self adapt)

 

RS232 port

Rate: 300-115.2Kbps auto-adaptable (Asynchronous)

Interlace characteristic: satisfies ITU-T V.24

Connector-RJ45

 

FXS:

Ring Voltage-75V

Ring Frequency-25Hz

Two line input impedance      600Ω(hanging off

          Wastage40 db

                   

FXO switch port:

Ring test voltage35V

     Ring test frequency17HZ-60HZ

     Two line input impedance600Ω(hanging-off)

 Wastage40 db

 

 

Power supply

working voltage range wide, good anti-disturb and Isolation, work stable

option I  -DC-48V,range DC-36V--DC-72C option II —AC120V,

range AC90V-AC260V

Environment condition

Operating temperature: -25C ~+70 C

Storage temperature: -40 C ~ +80 C

Relative temperature: 95% (uncondensed)

Dimension (19inch rack mount)

 

Length: 433mm

Width: 138mm

Height: 44mm

 

 

Order information

TD-E1-16*FXO-FXS-MUX-AC

TD-E1-16*FXO-FXS-MUX-DC

TD-E1-16*FXO-FXS-ETH-MUX-AC

TD-E1-16*FXO-FXS-ETH-MUX-DC

TD-E1-16*FXO-FXS-ETH-RS232-MUX-AC

TD-E1-16*FXO-FXS-ETH-RS232-MUX-DC

TD-E1-16*FXO-FXS-ETH-RS232-NMS-MUX-AC

TD-E1-16*FXO-FXS-ETH-RS232-NMS-MUX-DC

 

Sitemap | Terms of Use | Privacy Policy