Overview

TD-IPMUX-01-02

As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, TDM‐IPMUX‐01/02    adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 01/02 E1 over FE port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100 auto‐sensed Ethernet ports. TDM‐IPMUX‐01 TDM‐IPMUX‐02 State‐of‐the‐art design provides the highest availability with the accurate timing signal and data bit stream reconstruction.

Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost. Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of service over existing Ethernet networks. It is also suitable for connecting to the wireless equipment to achieve fast deployment of E1 services. One particular application is to build E1 links with low cost Wireless LAN bridges, replacing much more costly microwave radios. Operators can use TDM‐  IPMUX‐01/02  to provide legacy TDM services over wired or wireless packet network

Product Characteristics

  1. Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.
  1. Provide 4 FE electrical ports and 1 FE optical port, 2 uplink ports, 2 user data ports or monitoring ports, optical port can be used for uplink or user data.
  2. User‐friendly Web server supported for easy setup and maintenance
  1. Support SNMP V1/V2 network management
  1. E1 clock supports 3 mode: local clock, adaptive and loopback
  1. E1 service support lossy and lossless protection
  1. Ethernet built‐in layer 2 switch, support VLAN (port based, 802.1Q based and QinQ based), QoS(port based,802.1P based, MAC based and TOS based).
  1. Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, CDP, Ethernet ring protection, OAM and MAC address automatic learning
  2. Ethernet packet size up to 9720byte
  1. Point to point and point to multipoint supported
  1. Local Ethernet port throughput limiting
  1. Software and hardware online upgrade

E1 Interface Features

Comply with ITU‐T G.703 recommendation End‐to‐end delay (minimum delay setting): 10ms

Output frequency offset (adaptive timing, stabilized): 5 ppm Output jitter (adaptive timing): 0.1UI

Interface Impedance: defaultE1‐120Ω; Supporting 75Ω Connector: RJ‐48C

Ethernet Port

Comply with IEEE 802.3, 802.1Q, 802.1ad, 802.1P and relative other protocol. Operating Mode10M/100M Adaptive, Half/Full Duplex Adaptive

MTU: 9720byte

Connector100M Electrical port: RJ45 100M Optical Port: LC

Interface no.: 100M Electrical Port4 100M Optical Port: 1

Specification

Item

Description

Model

TDM‐IPMUX‐01/02

2 UPLINK, 1/2 E1

Service card

Ethernet uplink card

4 FE electrical ports and 1 FE optical port

Comply with IEEE 802.3, 802.1Q, 802.1P, 802.3x

Speed and duplex auto‐negotiation or manual

E1 Interface

TDM‐IPMUX‐01: 1 E1 ports

TDM‐IPMUX‐02: 2 E1 ports

Power

Supply

AC or DC

DC: ‐48V (‐32V ~ ‐72V)

AC: 220V (165V ~ 265V)

Consumption

≤40W

Working Environment

Temperature

0~ 50°C

Relative Humidity

≤90% (non‐condensing)

Dimension

W x H x D (mm):

185 x 35 x 136.5 (mm)

File-Name Download
Techroutes-TDMOIP User Manual.pdf
Download