Overview

TD-IFMC-FE-P

The TD‐IFMC‐FE‐P series Industrial POE Media Converter is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. In addition to transmitting data, the twisted‐pair port also injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. All Power over Ethernet Powered Devices (IEEE 802.3af/at complaint) are supported, as the TD‐IFMC‐FE‐P series can deliver a full 15.4W / 30W of power to the remote device.
The TD‐IFMC‐FE‐P series is designed to extend the distance of a network by converting Fast Ethernet data between twisted pair cabling and multi‐mode or single‐mode fiber‐optic cabling. It will operate in industrial grade temperature, used in traffic management, oil and gas pipelines, weather tracking, industrial and outdoor applications. Additionally, it can be installed by DIN‐rail or wall‐mount, allowing users to deploy any mix of network conversions required. The TD‐IFMC‐FE‐P features a 100Base‐FX fiber port and a 10/100Base‐TX twisted‐pair port. The fiber optic port features SC connector and operating distance from 2km to 120km depending on different Model. The twisted‐pair port has an RJ‐45 connector with a maximum operating distance of 100m. Many Backbone switch products now support the industry‐standard IEEE802.1Q specification for VLANs that send extra‐long data packets on the network. The TD‐IFMC‐FE‐P series converters are fully compatible with these long packets, enabling them to be used in modern networks.

  Features

  • UTP with POE to fiber media converter
  • IEEE 802.3af/at complaint
  • RJ45 support auto MDI/MDI‐X function
  • Auto‐negotiation speed, half/full‐duplex
  • Store‐and‐forward & Cut‐thought optional
  • Built‐in LFP (Link‐fault‐pass‐through) function
  • Jumbo frame: 9kbytes
  • Wide‐range redundant power design ( 12~56VDC )
  • Support wide operating temperature (‐40 ˚C ~ +85 ˚C)
  • Power polarity reverse protect
  • Overload current resettable fuse present
  • IP‐40 protection
  • Provide EFT protection for Power line
  • Support Ethernet ESD protection
  • DIN‐Rail and Wall‐ Mounted Installation

Specification

Standards

IEEE802.3 10BaseT; IEEE802.3u 100BaseT(X)

IEEE802.3x Flow control; IEEE802.1d Spanning Tree,

IEEE802.1Q VLANs; IEEE 802.3af/at POE

Performance

Processing Type : Store and Forward, Cut‐through MAC Table Size: 1Kbit

Buffer Space: 288Kbit

Time Delay: 150μs

Copper Port

Data Rate: 10/100M Connector: RJ45

Distance: 100m

Fiber Port

Data Rate: 155M

Connector: SC as default, FC/ST Optional

Distance: MMF=2km,SMF =20/40/80/100/120km, Bi‐di=20/40/80/100/120km

Dip‐switch

Dip1 ON + Dip2 ON = Modified Cut‐through Mode Dip1 ON + Dip2 Off = Converter Mode

Dip1 Off + Dip2 ON = Cut‐through

Dip1 Off + Dip2 off = Store and forward mode Dip4 ON = LFP Enable;

Dip4 Off = LFP Disable

LED indicators

PWR1: ON=Power Connected PWR2: ON= Power Connected

FL/A: ON=Fiber Connected; Active=Data Transmitting

TL/A: ON=Copper Connected; Active= Data Transmitting

100M:  ON=100M Data Rate Transmitting

POE:  ON=Power Working; Off=No Power

Power

Input Voltage: 12~56 VDC, redundant power inputs Power Consumption: <5W (POE excluded ) Protection: Overload Current; Reverse Polarity

Connector: Terminal Block

Environment

Operating Temperature:‐40 ˚C ~ +85 ˚C Storage Temperature: ‐40 ˚C ~ +95 ˚C

Relative humidity: 5‐95% ( no condensation)

Physical Characteristics

Housing: IP40 Protection; Aluminum Alloy Installation: DIN‐Rail , Wall‐Mounted Dimension: 115*81*35mm

Weight: 0.30kg