Overview

TD-OP-V.35

V.35 fiber modem extends V.35 interface service over fiber. A pair of V.35 Fiber Modems provides n*64K (n=1‐32) V.35 network “extension” between remote and locations .The TD‐OP‐V35 is designed to transmit/receive V.35 data over one string of fiber. It allows transmission over Single‐mode fiber with distances up to 120km. LED status indicators monitor the fiber and V.35 links. The Model TD‐OP‐V.35 is available with either an AC or DC power supply and is supported by a wide range of applications and power supply environments.

Specification

Product Characteristics

  • Have two row of LED, one indicates local status, the other indicates remote status;
  • The V.35 Rate is N*64K, N=1‐32;
  • Have two clock way: V.35 master clock and V.35 slave clock;
  • Have three Loop‐Black Mode: Fiber interface Loop‐Back (ANA), V.35 interface Loop‐back (REM);
  • Single Fiber or Dual Fiber option;
  • Remote adjustment of velocity for remote device will be available when the local setting into the master clock and the remote set into slave clock;
  • E1 fiber modem matching V.35 fiber by pair, one G.703/V.35 interface conversion can be saved out;
  • It has PBRS test function and could be used as a 2M error code device.
  • V.35 interface support hot‐plug and can be connected with other DCE or DET device;

V.35 interface

Transmission Velocity: N*64Kbps (N=1~32)

Electric Characteristics: according ITU‐T V.35 connector female M34

Connect Way: DCE, can connect with DCE or DTE units

Power supply

Working voltage range wide, good anti‐disturb and Isolation, work stable

Option‐I DC‐48V, range DC‐36V to DC‐72V Option‐II AC220V, Range: AC 90V to AC 260V Option‐III AC220V+ DC‐48V

Power Consumption: <=3 Watts

Environment condition

Operating temperature: 0 °C ~55 °C Storage temperature: ‐20 °C ~ +70 °C Humidity: 95% RH (non‐condensing) Cooling: Convection Cooling

Dimension

210mm (L)

140mm (W)

30mm (H)