Overview

TR-S8500 Series

Techroutes S8500 Series, a new generation T-bit carrier-class core switch oriented for carrier’s IP MANs and campus networks. Developed on the leading architecture of distributive multi-stage switching matrix and TRROS – a software platform Techroutes with its own independent intellectual property rights, TR-S8500 Series provides high-performance L2/L3/L4 wire speed switching capacity by integrating services such as IPv6, MPLS VPN, network security, flow analysis, virtualization, with high reliable techniques including continuous forwarding, graceful restarting and loop network protection, the work efficiency of TR-S8500 Series and its maximum running time are guaranteed. TR-S8500 Series supports the “Green Touch” architecture and “Smart@CHIP”.

Specification

Item

TR-S8503

TR-S8506

TR-S8510

Backplane

3Tbps

6Tbps

12Tbps

Switching Capacity

1.28Tbps

2.56Tbps

3.12Tbps

Packet forwarding rate

360Mpps

720Mpps

1440Mpps

Total Number of Slots

3

6

10

Number of service slots

2

4

8

MAC Switching Capacity

Static configuration and dynamically learning of MAC address

Check and delete MAC address

Configuring of MAC address aging time

Limit on MAC address learning number

MAC address filtering function

Black-hole MAC items

VLAN

4K VLAN entries

GVRP

1:1 and N:1 VLAN Mapping

Basic QinQ and selective QinQ

Private VLAN

STP

802.1D (STP), 802.1W (RSTP), 802.1S (MSTP)

BPDU protection, root protection and ring protection

Multicast

IGMP v1/v2/v3

IGMP Snooping

IGMP Fast Leave

Multicast group policy and multicast number limit

Multicast traffic cross VLAN duplication

PIM-SM and PIM-DM

IPv4

Static routing, RIP v1/v2, OSPF and BGP

Policy routing.

Load balance through equal-cost routing

Graceful Restart of OSPF and BGP

BFD for OSPF and BGP

IPv6

ICMPv6, DHCPv6, ACLv6, IPv6 Telnet

IPv6 Neighbor Discovery

Path MTU Discovery

MLD and MLD Snooping

IPv6 static routing, RIPng, OSPFv3 and BGP4+

Manual tunnel, ISATAP tunnel and 6-to-4 tunnel

MPLS VPN

LDP protocol

MCE

P/PE of MPLS VPN

MPLS Traffic Engineering (TE)

MPLS Operations, Administration, and Maintenance (OAM)

QoS

Traffic classification of each field of L2/L3/L4 protocol headers

CAR traffic control

802.1P/DSCP priority remark

Multiple queuing algorithms such as SP, WRR or SP+WRR

Tail-Drop, WRED

Traffic supervision and traffic shaping

Security features

Identification and filtering of L2/L3/L4 based ACL

Defend against DOS or TCP attacks

Suppression of broadcast, multicast and unknown unicast packet

Port isolation

Port security, IP+MAC+port binding

DHCP Snooping, DHCP Option 82

IEEE 802.1x certification

Radius and TRTacacs+ Authentication

uRPF

Command line authority control based on user levels

Reliability

Dual Master Control Redundancy (except TR-S8503)

Power 1+1 redundancy

Master control, service card hot swap and service automatic recovery

Static LACP link aggregation and cross service card link aggregation

Ring network protection including EAPS

VRRP

Ethernet OAM 802.3ah/802.1ag/ITU-Y.1731

GR for OSPF and BGP

BFD for OSPF and BGP

ISSU

Management and Maintenance

Console, Telnet and SSH

SNMP v1/v2/v3

Upload and download of TFTP files

Remote Network Monitoring (RMON)

Product Characteristics

  • Advanced Hardware Architecture Design & Industry-Leading Processing capacity
  • With the leading architecture of distributive multi-stage switching matrix, the ASIC switch chip and the multi-core processor, the backplane of TR-S8500 Series is up to 12T and the data switching capacity is up to 5.12T.
  • TR-S8500 Series supports high-intensity 10GE service boards and realizes the wire-speed switching of 3 layers without blocking.
  • A single service board of TR-S8500 Series supports up to 512K MAC address entries and 200K layer-3 routing tables.
  • Carrier-class High Reliability
  • TR-S8500 Series adopts HPS (Hitless Protection System). The key components of TR-S8500 Series such as the power system and the fan system support redundancy design. All system modules support hot-swap and seamless switching without need of manual intervention.
  • TR-S8500 Series supports redundancy protection mechanism such as STP/RSTP/MSTP protocol, VRRP protocol, ring network protection, dual uplink active/standby link protection and LACP link aggregation.
  • TR-S8500 Series supports ISSU (In-Service Software Upgrade) and GR (Graceful Restart) for OSPF/BGP, guaranteeing the user data non-stop forwarding when the system is upgrading.
  • TR-S8500 Series supports BFD and realizes fault detection and service recovery in seconds through linking with layer-2 or layer-3 protocol.
  • TR-S8500 Series has perfect Ethernet OAM, 802.3ah, 802.1ag and ITU-Y.1731, which can real-time monitor the network operating state and rapidly detect and locate the malfunction.
  • High Reliability (99.999%): MTTR of TR-S8500 Series is 50ms, meeting the requirement of the carrier- level service.
  • Innovative VSS Technique
  • TR-S8500 Series supports TRVSS (Techroutes Virtual Switch System), which can virtualizes multiple physical devices into one in logic. The virtualized system is superior to the independent physical device in performance, reliability, flexibility and management.
  • Doubled Performance: The virtualized system makes the best use of each link in the device and avoids the blocking of STP to the link.
  • High-reliability: Based on the advanced distributed processing technique and the efficient function of cross-physical device link aggregation, TR-S8500 Series provides with non-stop layer-3 routing forwarding and avoids single points of failure.
  • Flexibility: With the function of TR-S8500 Series virtual cluster service cards, the distance of virtual cluster system can expand to 80KM, breaking the geographic restriction of traditional cluster technique.
  • Easy Management: The whole virtual system realizes single IP unified management and simplifies the management of network device and network topology.
  • Comprehensive Service
  • TR-S8500 Series supports complete layer-2 and layer-3 multicast routing protocol and meets the access requirement of IPTV, multi-terminal high-definition video monitoring and high-definition video meeting.
  • TR-S8500 Series supports complete layer-3 routing protocol and a super-large routing table capacity, which make super-large data center network, campus network, enterprise network and industry private networks available.
  • TR-S8500 Series supports complete MPLS VPN of layer-2 and layer-3, which meets the requirement of industry private VPN users and enterprise network VPN users.
  • Comprehensive IPv6 Solutions
  • TR-S8500 Series comprehensively supports IPv6 Neighbor Discovery, ICMPv6, Path MTU Discovery and DHCPv6.
  • TR-S8500 Series supports IPv6 based Ping, Traceroute, Telnet, SSH, ACL, meeting the need of IPv6 network equipment management and service control.
  • TR-S8500 Series supports IPv6 multicast characteristics including MLD, MLD Snooping and IPv6 layer-3 routing protocols including IPv6 static routing, RIPng, OSPFv3 and BGP4+.
  • TR-S8500 Series supports IPv4-to-IPv6 technologies including IPv6 manual/automatic tunnel, auto tunnel, IPv6-to-IPv4 tunnel, and ISATAP tunnel.
  • Comprehensive Security Mechanisms
  • TR-S8500 Series adopts advanced hardware architecture design, realizing the hierarchical scheduling and protection of the packet. It provides multiple security measures to defend against DOS or TCP attacks; and supports command line authority control based on user levels.
  • Comprehensive Security Certification: TR-S8500 Series complies with IEEE 802.1x, Radius, TRTacacs+.
  • Enhanced Service Security Mechanism: TR-S8500 Series supports the plain text or MD5 authentication of relevant routing protocol; uRRF.
  • Innovative Green Environmental Design
  • TR-S8500 Series supports the “GreenTouch” architecture. Its power consumption is no more than 1000W.
  • Smart Power Management System: TR-S8500 Series adopts advanced power system architecture design which can realize the function of efficient power switching, private power monitoring, soft start, real- time monitoring, intelligent adjustment and energy-saving.
File-Name Download
S8500 Installation Manual.pdf
Download
01-Configuration Preparation.pdf
Download
02-Basic Configuration.pdf
Download
03-Network Management Configuration.pdf
Download
04-Security Configuration.pdf
Download
05-Web Configuration.pdf
Download
06-Interface Configuration.pdf
Download
07-Interface Range Configuration.pdf
Download
08-Port Physical Characteristic Configuration.pdf
Download
09-Port Additional Characteristics Configuration.pdf
Download
10-Port Mirroring Configuration.pdf
Download
11-MAC Address Table Configuration.pdf
Download
12-MAC Access List Configuration.pdf
Download
13-802.1x Configuration.pdf
Download
14-VLAN Configuration.pdf
Download
15-GVRP Configuration.pdf
Download
16-Private VLAN Settings.pdf
Download
17-STP Configuration.pdf
Download
18-STP Optional Characteristic Configuration.pdf
Download
19-Link Aggregation Configuration.pdf
Download
20-PDP Configuration.pdf
Download
21-LLDP Configuration.pdf
Download
22-EAPS Configuration.pdf
Download
23-IGMP-Snooping Configuration.pdf
Download
24-IGMP-proxy Configuration.pdf
Download
25-DHCP-Snooping Configuration.pdf
Download
26-Layer 2 Tunnel Protocol Configuration.pdf
Download
27-QoS Configuration.pdf
Download
28-DoS Attack Prevention Configuration.pdf
Download
29-Attack Prevention Configuration.pdf
Download
30-Network Protocol Configuration.pdf
Download
31-IP ACL Application Configuration .pdf
Download
32-Routing protocol Configuration.pdf
Download
33-IP Hardware Subnet Routing Configuration.pdf
Download
34-IP-PBR Configuration.pdf
Download
35-Multi-VRF CE Configuration.pdf
Download
36-Reliability Configuration.pdf
Download
37-Multicast Configuration.pdf
Download
38-IPv6 Configuration.pdf
Download
39-ND Configuration.pdf
Download
40-ospfv3v Configuration.pdf
Download
41-NTP Configuration.pdf
Download
42-IPv6 ACL Configuration.pdf
Download
43-Time Range Configuration.pdf
Download
44-uRPF Configuration.pdf
Download